Uniden UBC92XLT - Manual (Page 36)

36
Special Features
and lowest blank channel alternate on the
display.
2. Press E/Pgm to store the frequency into the
blank channel. To select another channel,
repeatedly press Func + or Func + to
select the blank channel you want, then press E.
You can also use the 0-9 keys to select the bank.
If you enter a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated. If
you entered the frequency by mistake, press /Clr.
To enter the frequency anyway, press E/Pgm to
accept.
The scanner moves to program mode after you
stored the frequency.
Search Skip Memory
You can skip up to 50 specified frequencies during a
search. This lets you avoid unwanted frequencies or
those already stored in a channel.
Note: Search skip frequencies are shared by service
search, direct entry search, chain search. If skip
frequencies are sent in certain mode, the
frequencies are also skipped in other search modes.
To skip a frequency, press Func and L/O when the
scanner stops on the frequency during a search or a
search hold. The scanner stores the frequency in
memory and automatically resumes the search if it is
not in hold.
Follow these steps to clear a single frequency from
skip memory so the scanner stops on it during a
search.
1. Press Hold to stop the search.
UB324 Paper OM reduced size.fm Page 36 Wednesday, February 2, 2005 8:01 PM