Uniden EXAI2248 series - Manual (Page 29)

[ 27 ] M E M O R Y D I A L I N G
MEMOR
Y DIALING
THE INTEGRA
TED
ANSWERING DEVICE
Memory dialing from Talk Mode
1) Press talk/flash. “ Talk ” and
the volume setting appears.
2) Press memory.
3) Enter a number (0 - 9) to select the memory location of
the desired phone number. The selected phone number is
displayed. Then the number is dialed.
4) To hang up, press end.
Talk Talk
Volume High
Talk 0:00
Talk 0:35
0123456789012
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
and are prompted to enter the account number, simply press memory and the
location number where the special number has been stored.
Store your special number with an identifying name. (Refer to “Storing Phone
Numbers and Names” on page 22.)
If you select a
memory location that
does not have a
stored number, an
error tone sounds and
the phone will not
dial.
EXAI2248 2/8/2 7:05 PM Page 27