Uniden EXAI2248 series - Manual (Page 46)

T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 44 ]
set/ringer menu
ans on/off find hs volume
greeting memo
skip/ff repeat/rew
delete play/
stop
status
Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short
beeping tone. If you set the Message Alert to On and when a new message is
received, the alert tone will sound every 15 seconds.
Setting the Message Alert tone to On or Off by using
menu key.
1) Press menu five times.
You hear the announcement “Message Alert” and the
current setting ([
] Off or [ ] On), and it is
displayed on the base.
2) Press repeat/rew or skip/ff to select.
3) Press set/ringer to select the new setting. You hear a
confirmation tone, then the announcement “Message
Alert” and the current setting you have selected is
announced. When the first new message is received, the
beeping tone will begin to sound.
Turning the Message Alert tone Off by pressing any key.
1) To quickly turn Message Alert tone off, press any key on the base unit and
the tone will automatically deactivate. To reset, go back into the menu setup
mode (steps 1 - 3 above.)
Turning Message Alert tone Off when you’re away from your phone.
1) When all new messages are played back using the remote playback feature
(see page 51) the Message Alert tone will automatically deactivate. The tone
will not deactivate until all messages are played back.
EXAI2248 2/8/2 7:05 PM Page 44