Uniden EXAI2248 series User Manual

Page 6

Advertising

[ 4 ]

Q U I C K R E F E R E N C E G U I D E

QUICK REFERENCE GUIDE

Step 1 Charging the Battery

TO INSTALL THE HANDSET BATTERY

Step 2 Connecting

Step 3 Setting Up the Caller ID/Language

Step 4 Setting Up the Answering System

CONNECT TO A PHONE LINE

When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the
telephone cord into the base unit and then into
a telephone wall jack.

Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Choosing the dial mode” on page 17.

Remove the cover.

TO CHANGE CALLER ID OPTIONS

Press call id/menu.

Press or to

move

the

pointer

an option.

Press select to change the option
setting.

TURN THE ANSWERING SYSTEM ON

TO RECORD A PERSONAL GREETING

Press and hold
greeting until
you hear “Record
greeting” and a
confirmation
tone.

Record your personal greeting. (Position
yourself as near to the base as possible
and speak clearly.)

When finished press greeting again or
play/stop.

Press end and return the handset to
the base.

TO CHOOSE THE LANGUAGE

Press call id/menu.

Press or to

move

the

pointer

Language

Press select to select

Eng

(English) or

Fr.

(French).

Press end or return the handset to
the base.

Plug the AC adapter cord into the base
unit and then into a 120V AC outlet.

Place the handset on the base.

Connect the
battery pack
connector with the
correct polarity.

Replace the cover.

TO PLUG INTO AC POWER

Note:

You must charge the battery continuously
for 15 - 20 hours before using the phone.

Note: Three Caller ID options are available:
AutoTalk, Caller ID on Call Waiting (CIDCW),
and Area Code.

Press ans on/off.

A pre-recorded greeting
will play and your
system is ready to
accept calls.

set/ringer

menu

ans on/off

find hs

volume

greeting

memo

skip/ff

repeat/rew

delete

play/

stop

status