Universal Remote Control (URS) Thermostat THZ-100 - Manual (Page 24)

Page 24
THZ-100 T
HERMOSTAT
Selecting the Heating Mode
If you desire to change the HVAC system equipment mode to
heating mode then use the arrow keys to move the highlight bar to
Heat.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Cancel key
label in the smart-key label at the bottom left of the display.
If the Climate Modes screen times out and goes back to the main
screen without pressing the OK button, no change is made to the
climate mode.
In Heat mode, the thermostat activates the system equipment to
heat your home per the programmed schedule or hold temperature.
The thermostat does not activate the system equipment to cool your
home while in the Heat mode.