Universal Remote Control (URS) Thermostat THZ-100 - Manual (Page 38)

Page 38
THZ-100 T
HERMOSTAT
Selecting Auto Dimming
If auto dimming is turned on, then the bottom item in the list on this
screen shows, Auto Dimming ON. If auto dimming is turned off
then the bottom item in the list on this screen shows, Auto
Dimming OFF.
If you desire to change the auto dimming state of your thermostat
LCD display then use the arrow keys to move the highlight bar to
Turn <XXX> Auto Dimming to toggle this option.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this option. If you decide to
cancel the operation then press the key below the Cancel key label
in the smart-key label at the bottom left of the display.
Viewing THZ-100 Thermostat Information
The Information selection in the Options screen is used to display
various THZ-100 thermostat parameters to indicate how the
thermostat was setup as well as some wireless signal strength
information. This information is not used in normal operation.
Setting the Date and Time
If your THZ-100 has lost wireless communication with the MRX
Advanced Network System Controller main unit, the Options list
includes an option to set the date and time. If you desire to set the
date and/or time then use the arrow keys to move the highlight bar
to Date & Time.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to change your settings. If you decide to
cancel the operation then press the key below the Go Back key
label in the smart-key label at the bottom left of the display.
After pressing OK, the screen updates to give you a list of the date
and time entries that you can change. The left column displays
Month, Day, Year, Hour, and Minute. The right column displays the
current value. Use the arrow keys to move the highlight bar to
value you wish to change.
in the smart-key label at the bottom right of the display to select this
option. If you decide to cancel the operation then press the key
below the Cancel key label in the smart-key label at the bottom left
of the display.