Universal Remote Control (URS) Thermostat THZ-100 - Manual (Page 25)

Page 25
THZ-100 T
HERMOSTAT
Selecting the Auto Changeover Mode
If you desire for your HVAC system equipment to automatically
switch between the cooling and heating modes as needed to
maintain the desired comfort level in your home, use the arrow keys
to move the highlight bar to Auto.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Cancel key
label in the smart-key label at the bottom left of the display.
If the Climate Modes screen times out and goes back to the main
screen without pressing the OK button, no change is made to the
climate mode.
In Auto mode, the thermostat activates the system equipment to
cool or heat your home per the programmed schedule or hold
temperature. The system automatically changes between cooling
and heating as needed.