Unisys NX5820 - Manual (Page 115)

VX1305 Servers
7017 6300–005 6–9
Configuration Guidelines VX1305
Table 6–7 lists guidelines for configuring VX1305 servers. Figure 6–2 shows the
connection from a VX1305 server to the CIOM card in the CEC module or to the PCI Thru
card in channel racks.
Table 6–7. Configuration Guidelines, VX1305 Servers
Area Rule/Recommendation
Windows NT Connection
Packages See Table 6–5 for details.
Processor Addition One additional processor may be added to a maximum of two per server. See
Table 6–3 for details.
Disk Addition Additional disk may be added to a maximum of three per server. See Table 6–1
for recommendations.
Memory Additions Three increments of 256 MB can be added to a memory board. See Table 6–4.
PCD Generation Refer to Appendix B of the A Series and ClearPath HMP NX Systems I/O
Hardware Configuration Guide (7008 6087) for information on PCD
generation.
Serial 1
U
U
K
M LPT
Ser 2 Ser 1 Vid
LAN
0627A
Serial 2
Server A
7019 7488-001
(CSB3-10C)
Remaining Servers
7019 7488-002
(CSB3-15C)
To CS Bus in CEC or PCI
Thru card in channel racks
Figure 6–2. VX1305 Server CS Bus Cable Connection