Configuring operator display workstations, Configuration guidelines for scp monitors and odw, Displays – Unisys NX5820 User Manual
Page 78
Configuring Additional Displays
3–12
7017 6300–005
Configuring Operator Display Workstations
ODWs are a client responsibility. The following minimum requirements apply:
•
120 Mhz Pentium processor that:
−
Is capable of running Windows NT workstation at 3.51 or higher operating system
software
−
Has a copy of SCO XVision (PC1-XV)
−
Has Unisys custom SCP fonts (installed as part of the NX Administration utilities
after installing SCO XVision)
•
Contains:
−
Minimum 16-MB memory
−
1-MB video RAM
−
256-color display (minimum 1024 x 768 resolution)
−
Minimum 1-GB hard disk drive
−
1.44-MB floppy disk drive
−
CD-ROM drive with tray
−
Ethernet LAN (10BaseT on the ClearPath private LAN)
−
Ethernet LAN (10BaseT for use on the public LAN)
The following software products are among the choices in the market that enable an ODW
to remotely administer ClearPath Windows NT environments:
•
Windows NT Server resource kit
•
MicroSoft BackOffice
Configuration Guidelines for SCP Monitors and ODW Displays
Table 3–5 lists guidelines for configuring monitors with keyboard, mouse, and ODW
(ODT/maintenance) displays. Figure 3–4 show examples of typical single ODW
arrangement.