Univex LD190SS1 - Manual (Page 24)

22
EN
O
PTIONAL SETTING
 Antenna Confirmation
DTV
This function lets you check the digital signal strength of each channel.
1
Press [SETUP] to display the main menu.
2
Use [Cursor
K / L] to select “CHANNEL”, then press
[ENTER].
3
Use [Cursor K / L] to select “Antenna”, then press
[ENTER].
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
4
Use [the Number buttons] or [CH
K / L] to select the
channel for which you want to check the digital signal
strength.
Antenna Antenna
Back
Ch Change
11-1
CH
Current 50 50 Max
• If the channel is set to analog channel or external
input, you cannot confirm the antenna condition.
Antenna Antenna
Back
Ch Change CH
Indicator is available
for digital broadcasting
only.
Video
5
Press [SETUP] to exit.
 Language Selection
You can choose English, Spanish, or French as your on-screen language.
1
Press [SETUP] to display the main menu.
2
Use [Cursor
K / L] to select “LANGUAGE”, then press
[ENTER].
3
Use [Cursor
K / L] to select “English”, “Español” or
“Français”, then press [ENTER].
Language Language
Select the language for setup display.
Elija el idioma de ajuste.
Sélectionner langue écran config.
Español
Français
English
4
Press [SETUP] to exit.
Note:
• If you need the English menus instead of the Spanish or
French menus, press [SETUP]. Use [Cursor K / L] to select
“IDIOMA” or “LANGUE”, then press [ENTER].
Use [Cursor
K
/
L] to select “English”, then press [ENTER].
Press [SETUP] to exit the main menu.