Univex LD190SS1 - Manual (Page 26)

24
EN
O
PTIONAL SETTING
 Sound Adjustment
You can adjust the sound mode, equalizer and some other sound functions.
Before you begin:
You must set ”Home” in ”Location”. Refer to page 33.
Otherwise, the settings you adjusted will not be
memorized after you turn off the unit.
1
Press [SETUP] to display the main menu.
2
Use [Cursor
K / L] to select “SOUND”, then press
[ENTER].
3
Use [Cursor K / L] to select the sound type you want to
adjust, then press [ENTER].
Standard
Ext. Amp
Sound Mode
Equalizer
TV Speakers
Sound Sound
4
Adjust the following items.
Sound Mode
Use [Cursor K / L] to select the desired setting, then
press [ENTER].
(“Personal “, “Standard “, “Movie “, “Music“ and “News “)
Equalizer
TV Speakers
Sound Mode
Movie
Music
News
Standard
Personal
Sound Sound
Equalizer
Adjust tonal quality for each frequencies.
Use [Cursor
s / B<>] to select the specific frequency
and use [Cursor
K / L] to adjust the level, then press
[ENTER].
Equalizer Equalizer
0
120Hz
0
500Hz
0
1.5kHz
0
5kHz
0
10kHz
TV Speakers
Select the audio output from the unit’s speakers, or not.
If your amplifier is HDMI link function compatible and
connected by an HDMI cable to this unit, some sound
operations such as volume up can be changed by using
this unit’s remote control.
Use [Cursor
K / L] to select the desired option, then
press [ENTER].
On
TV Speakers TV Speakers
Ext. Amp
"On":
Sound will be output from the TV
speakers.
"Off":
Sound will not be output from the
TV speakers.
"Ext. Amp":
Operation is possible by connecting
to the HDMI-CEC compatible amp
with a HDMI cable. For details look
in the user manual.
Off
On
The sound will be output from the unit’s
speakers.
Off
The sound will not be output from the
unit’s speakers.
Ext. Amp
You can control audio output from your
connected HDMI link devices by using
this unit’s remote control.
5
Press [SETUP] to exit.
Note:
• To cancel sound adjustment, press [SETUP].
• We do not guarantee 100% interoperability with other
brands of HDMI link devices.