Uniden TL27WRA-B - Manual (Page 28)

Setting Panorama or Zoom Display (WIDE MODE)
Press the
WIDE MODE
button.
This sets the screen to the Normal screen
mode.
Each press of this button switches the input
as follows:
Full screen Normal screen
Zoom screen Panorama screen
The display screen can be switched to the Full, Normal, Panorama, and Zoom screen modes.
• When you select another channel, the screen mode will revert back to the default
setting. The default screen type can be set with “Screen Setup” ([finger] page 38)
in the menu screen.
• In the Panorama screen mode, 4:3 aspect ratio images are expanded to naturally
fill the entire screen.
• In the Normal screen mode, a black band containing no image appears on the left
and right of the picture.
• Panorama display cannot be selected when the video format is 720p/1080i.
• The same settings can also be made with “Screen Setup” (
page 38) in the
menu screen.
MUTE POWER
SLEEP TV/VIDEO DISPLAY
WIDE MODE HDMI AUDIO
Notice
Reference
WIDE MODE
• About the Auto-wide Switching Function
The auto detection switching function is activated when WSS or ID-1 type aspect
ratio information is detected in the video signal.
Aspect ratio Operation
4:3 Same as the Standard mode setting in the
menu screen. (
page 38)
Letter Box The screen display mode is Zoom.
16:9 The screen display mode is Full.
28
1
W
A
TCHING
TV