Volume control, Seting the clock, Adjusting the ringer volume and tone – Uniden FP 107 User Manual

Page 10: Ringer volume control, Handset volume control, Speaker volume control

Advertising
background image

ADJUSTING THE RINGER VOLUME AND TONE

Ringer volume control

Locate the volume control switch at the rear of the
base.
Slide the ringer volume switch to the desired

off/lo/hi setting.

9

To avoid losing the day and time settings if AC power fails, we recommend you install

a backup battery before you set the day and time (see “Installing a Backup Battery” on
Page 5). Follow these steps so the FP107 can record the correct day and time each
message and memo is recorded.
1. Hold down until the FP107 beeps once.
2. Press

3 times until SUNDAY appears.

3. Repeatedly press

or

#

to select AM or PM.

4. Press . The hour digit flashes.
5. Repeatedly press to set the correct hour.
6. Repeat Steps 4 and 5 to set the minute, month, date, and the day of the week.
7. Press .

If you do not complete

each step with-in 8

seconds, the FP107 exits
setup. Start again at

Step 1.

NOTE

store

store

VOLUME CONTROL

Handset volume control

While using the phone you can adjust the handset volume with

the control, located at the side of the base.

Speaker volume control

During a speaker phone conversation, you can adjust the speaker volume by sliding the
control (located on thr side of the base) until you hear the desired volume.

ringer volume

off / lo / hi

handset volume

hi

normal

speaker volume

min

max

mid

speaker volume

min

max

handset volume

hi

normal

mid

SETING THE CLOCK

store

Advertising