Uniden FP 107 - Manual (Page 21)

Remote Operation
You can operate the FP107 from almost any touch-tone phone or from a rotary phone
using a pocket tone-dialer.
Follow these steps to operate the FP107 remotely.
1. Dial your phone number from another phone.
2. When the FP107 answers, enter your remote operation security code (705 factory
preset). The FP107 beeps once to confirm that you entered the correct code.
3. Enter a remote command (see “Remote Command List”).
4. When you finish, hang up.
Changing the Remote Operation Security Code
The FP107's remote operation security code is preset to 705, but you can change it by
following these steps.
1. Hold down
until the FP107 beeps once.
2. Press once. 705 and SECURITY CODE are displayed. 7 flashes.
3. Enter the new 3 digit code.
4. Press
then press to return to the time display.
If you do not complete
each step within 8
seconds, the FP107 exits
setup. Start again from
Step 1.
NOTE
If you do not enter a digit
within 8 seconds, the
FP107 hangs up.
NOTE
20
The FP107 has ten (0–9)
display contrast settings.
NOTE
Setting the Display Contrast
1. Hold down until the FP107 beeps once. 5 and LCD CONTRAST appear.
5 flashes.
2. Repeatedly press or to select the desired display contrast settings.
3. Press to confirm the setting, then press to return to the time display.
Using Call Breakthrough
If you screen your calls but want to know when calls come in from certain people, give
them your Call Breakthrough (CBT) Code.
When a caller enters the CBT code during the outgoing message (168 factory preset),
the FP107 alerts you with a series of loud beeps for 35 seconds. To answer the call, pick
up the handset or press . If you do not answer, the caller can leave a message
after the outgoing message plays.
Changing the CBT Code
The CBT code is preset to 168, but you can change it by following these steps:
1. Hold down until the FP107 beeps once.
2. Press two
times. 168 and SET CBT CODE are displayed.
3. Enter the new 3 digit code.
4. Press then press to return to the time display.
store
store
store stop
store
store stop
store
store
store stop
ADVANCED FEATURES
If the FP107 Answer
Machine is off, after 15
rings it will automatically
switch on and answer the
call.
NOTE
speaker