Uniden FP 107 - Manual (Page 22)

21
Press To
00 Set the FP107 to not answer calls.
01 Set the FP107 to answer calls.
21 Play all messages.
22 Announce all Caller ID records.
31 Play new messages. .
32 Announce new Caller ID information.
4 Monitor the room for 20 seconds. Press 4 to repeat
monitoring.
5 Delete all messages (except new messages).
The FP107 says “Erase”, then press 1
5 Delete all Caller ID calls (except new Caller ID calls).
The FP107 says “Erase”, then press 2
6 Stop playback or recording.
8 Change OGM 1. After the FP107 beeps, begin speaking.
When you finish, press 6.
9 Play OGM 1.
REMOTE COMMAND LIST
After pressing 21, 22, 31, or 32 to play Caller ID records/messages remotely,
you can
Press To
1 Replay the previous Caller ID record or message.
3 Skip to the next Caller ID record or message.
4 Replay the current Caller ID record or message.
5 Delete the current Caller ID record or message.
6 Stop message playback.