Uniden FP 107 - Manual (Page 17)

The maximum recording
capacity is 16 minutes (or
68 recorded messages), or
86 Caller ID records.
NOTE
16
Checking the Outgoing Message
To check an outgoing message, press . OGM1 PLAYING appears and the message
plays.
If no outgoing message is recorded when you press OGM1, the FP107 announces
“You have no announcement one” and sounds four beeps.
Number of Rings
The FP107 can be set to 2, 4 or 7 rings before it answers the call and plays
your message. The selector is located at the rear of the base unit.
Setting the FP107 to Answer Calls
To turn on the FP107 and set it to answer calls and record messages, press the
once. The FP107 says “Answer on”. ANS ON is displayed, the FP107
plays the outgoing message. The hold answer indicator lights to show that the FP107
is ready to answer calls.
answer on/off
ogm
Using the Toll Saver
If the ring select switch is set to TS (toll-saver), the FP107 answers after two rings if you
have new messages. If there are no new messages, the FP107 answers after four rings.
This gives you time to hang up before the FP107 answers so you can avoid unnecessary
long-distance charges.
ringer
select
2 4 7 TS
ANS ON
Telephone Answering Machine
1 2:22 AM
PM 01/01 call#
NEW
00
RPT OGM 1 ANS ON
1 2 3 4
hold / answer new call new message
answer on / off ogm stop
call diversion call waiting block cid
play
delete dial
Caller ID
Telephone Answering Machine
1 2:22 AM
PM 01/01 call#
NEW
00
RPT OGM 1 ANS ONLY
OGM1 PLAYING
1 2 3 4
hold / answer new call new message
answer on / off ogm stop
call diversion call waiting block cid
play
delete dial
Caller ID
-00- -00-
CALLS MESSAGES
If the FP107 Answer
Machine is off, after 15
rings it will automatically
switch on and answer the
call.
NOTE