Other settings, Other settings displaying system information, Adjusting the key beep – Uniden SC230 User Manual
Page 40: Locking/unlocking the keypad, Turning power save on or off, Priority scan, Viewing the firmware version
40
Other Settings
Other Settings
Displaying System Information
Viewing Memory Used
See Scanner Info
E
% Memory Used
E
A bar showing the percent of memory used appears.
Press any key to return to the previous menu.
Viewing the Firmware Version
See Scanner Info
E
Firmware Version
E
Press any key to return to the previous menu.
Adjusting the Key Beep
Adjust Key Beep
E
• Off: The scanner is silent when you press a key.
• On: The scanner beeps when you press a key.
Locking/Unlocking the Keypad
Press and hold down
then CAR
/
to lock or
unlock the keypad.
Turning Power Save On or Off
Set Battery Save
E
• On: The scanner goes into low-power mode when you
monitor a conventional channel that has no activity.
• Off: Power save is off.
Priority Scan
SeT Priority
E
Or, while holding on any channel, press
+ 1/Pri to
select one of these priority modes:
Menu
Menu
Menu
Func
Menu
Menu
Func
Other Settings
SC230 Paper OM.fm Page 40 Wednesday, October 6, 2004 10:51 AM