Setting channel attenuation, Setting the frequency step – Uniden SC230 User Manual
Page 64
64
Programming/Editing Optional Settings
NFM
- the scanner uses narrowband FM for the
frequency.
Note: The default setting is AUTO.
Setting Channel Attenuation
program system
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
E
Select the channel
E
Set Attenuator
E
This setting controls whether the scanner attenuates
signals on this channel. Select your setting, then press E.
On
- the channel is attenuated by about 18 dB.
Off
- the channel is not attenuated.
Notes:
• The default setting is Off.
• You can also toggle this setting by holding on the
channel and pressing
and E.
Setting the Frequency Step
program system
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
E
Select the channel
E
Set Step
E
This setting selects the frequency step used for setting
the channel's. Select your setting, then press E.
Auto
- the step is based on the band (see the table at the
front of the manual)
Menu
Func
Menu
SC230 Paper OM.fm Page 64 Wednesday, October 6, 2004 10:51 AM