Uniden SC230 - Manual (Page 86)

86
Troubleshooting
If you still cannot get satisfactory results while using your
scanner or if you want additional information, please call
or write the Uniden Parts and Service Division.
The address and phone number are listed in the Warranty
at the end of this manual. If you would like immediate
assistance, please call Customer Service at
(800) 297-1023.
If you have Internet access, you can visit
http://www.uniden.com for additional information.
Scan won’t
start. You must press
Scan to scan. Press Scan.
The squelch
might need to be
adjusted. Adjust the squelch
threshold. See “Turning
On the Scanner and
Setting the Squelch” on
Page 34.
One or more
channels might be
locked out. Make sure the channels
you want to scan are
not locked out.
The antenna
might need to be
adjusted. Check the antenna
connection.
Weather
scan
doesn’t
work. The squelch
might need to be
adjusted. Adjust the squelch
threshold. See “Turning
On the Scanner and
Setting the Squelch” on
Page 34.
The antenna
might need to be
adjusted. Check the antenna
connection.
There might not
be a NOAA
weather
broadcast in your
area. Move to an area with a
NOAA weather
broadcast.
SC230 Paper OM.fm Page 86 Wednesday, October 6, 2004 10:51 AM