Programming conventional systems, Setting lockout on a car – Uniden SC230 User Manual
Page 52
52
Programming Radio Systems
Setting Lockout On A Car
Program SysteM
E
Select the system
E
Edit Car
E
Select the car
E
Set Lockout
E
This setting determines whether the scanner will scan this
car when it is enabled. Select your setting, then press E.
Lockout
- the car is not scanned.
Unlocked
- the car is scanned.
Note: The default setting is Unlocked.
Programming Conventional Systems
Program SysteM
E
New System
E
Conventional
E
Confirm? E
The scanner creates an empty conventional system, with
a default name of System nnn C. nnn increments
as you add new systems. C indicates that this is a
conventional system.
Refer to the appropriate section to set system-wide options:
• See “Editing the System Name” on Page 55
• See “Editing the System Quick Key (Conventional
Systems Only)” on Page 55
• See “Setting System Lockout” on Page 56
• See “Setting the System Hold Time” on Page 56
• See “Setting the Channel Delay Time” on Page 57
• See “Setting Data Skip” on Page 57
• See “Deleting Systems” on Page 58
• See “Copying Systems” on Page 58
• See “Entering/Editing Conventional Channel Groups”
on Page 53
Menu
Menu
SC230 Paper OM.fm Page 52 Wednesday, October 6, 2004 10:51 AM