Uniden BR330T - Manual (Page 61)

61
Programming Radio Systems
Quickly Programming Racing
Systems
You can use the menu system to program a racing
system (see “Manually Programming Racing Systems”
on Page 63). Or you can follow the onscreen prompts
as described in this section to quickly program your
scanner. These prompts are designed to help you
quickly enter a new race from a frequency list
purchased at the track (if the system is not already
preprogrammed into your scanner). When you
complete Steps 5 and 6, almost all cars will use the
default settings for the other steps.
1. While scanning,
press 0. Then rotate
the scroll control to
select New race,
then press E.
2. Enter the name of
the race, then press
E.
3. Enter the first car
number (up to 3
digits), then press E.
4. Enter the first driver
name (up to 12
characters), then
press E.
5. Enter the driver’s
frequency, then
press E.
Select race
New race
Name the race
_
Enter Car No
_
Enter Driver
_
Enter Frequency
_