Uniden BR330T - Manual (Page 64)

64
Editing the Car
Program System
Select the system
Edit Car
Select the car
Follow these steps to enter the car options.
1. Press 0-9 to enter the car’s number (up to 3
digits), then press the scroll control.
2. Rotate the scroll control to select one of the
following options. Then refer to the appropriate
section to set or change a car setting.
• See “Entering/Editing a Car Number” on Page 64.
• See “Editing a Driver” on Page 65.
• See “Setting a Car’s Quick Key” on Page 65.
• See “Editing a Car’s Channel” on Page 66.
• See “Deleting a Car” on Page 66.
• See “Setting Lockout On A Car” on Page 66.
Entering/Editing a Car Number
Program System
Select the system
Edit Car
Select the car
Edit Car No
1. Rotate the scroll control to select the first digit,
then press 0-9 to enter the correct digit.
2. Repeat Step 1 to enter or correct the second and
third digits if necessary, Then press E or press
down on the scroll control to accept the setting.
Hints:
• Each car number can be up to three digits.
• Press to delete the entire car number.
Menu
Menu