Uniden BC250D - Manual (Page 18)

Flexible Antenna
Attach the flexible antenna to the
antenna connector.
Beltclip
The beltclip is designed to fit snugly on
the back of the scanner.
Line up the four arms on the beltclip with
the four tabs on the scanner and slide the
beltclip into place, as shown on the right.
Listening Safely
To protect your hearing, follow these guidelines when you use
an earphone or headphones.
• Do not use the earphone to listen to the WX alert siren
test. The volume is not adjustable and damage to your
hearing could occur.
• Do not listen at extremely high volume levels. Extended
high volume listening can lead to permanent hearing loss.
• Set the VOLUME to the lowest setting before you begin
listening. After you begin listening, adjust the VOLUME to a
comfortable level.
• Once you set the VOLUME, do not increase it. Over time,
your ears adapt to the volume level, so a volume level that
does not cause discomfort might still damage your hearing.
Connecting the REMOTE Cable
You can transfer the programmed channels, talk group ID’s,
etc. to and from another BC250D or BC785D scanner using a
remote cable. See "Clone Mode" on page 81. You can also
upload or download the programmed data to or from a PC
using Uniden’s E-Scanner software. See "PC Control mode"
on page 80.
14
BC250D 11/6/2 11:36 AM Page 14