USRobotics NETServer/8 - Manual (Page 152)

10-2 Command Reference
How to . . .
Get help
To bring up a list of command options for Global Configuration,
use the following command:
help set global
Save Changes
To save any configuration changes you have made, use the
following command:
save global
View the Global Configuration Table
To view Global Configuration, type:
show global
The information you see might look something like this:
System Name: Cincinnati
Default Hosts: 192.77.203.54 192.77.203.55 192.77.203.64
192.77.203.65
IP Gateway: 192.77.203.12 Gateway Metric: 1
IPX Gateway: 0000A462:000000AC1262 Gateway Metric: 1
Default Route: Quiet (Off)
Domain: My_Domain.com Name Service: DNS
DNS Cache Timeout: 0 days 0 hours 30 minutes (30 min)
Name Servers: 192.77.203.13 0.0.0.0 0.0.0.0
Sys Loghosts: 0.0.0.0 0.0.0.0
RADIUS Server: 192.77.203.100 Alternate Server: 0.0.0.0
Accounting Server: 192.77.203.100 Alt. Acct. Server: 0.0.0.0
Telnet Access Port: 23
Assigned Address: 192.77.203.101 Reported Address: 0.0.0.0
ICMP error Logging: OFF Connect Message: ON Dial !root Access: ON
Random Hosts List: OFF SNMP agent: OFF Proxy Arp: OFF
PPP PAP Auth: ON
All of the parameters displayed are configurable.