USRobotics NETServer/8 - Manual (Page 95)

LAN-to-LAN Routing 6-21
If you had configured this location to use multiple lines without
a hunt group (see Step 3), you would configure the NETServer
to use whichever number the modem has stored, rather than
giving it the number explicitly. Since each modem has a differ-
ent number stored, each will dial a different number. Example:
set location Chicago script 1 “atds<slot#>\r” “CONNECT”
For detailed information on dial scripts, see Dial Scripts in
Chapter 10. Consult your modem reference guide for informa-
tion on AT commands supported.
Step 5 - Save your changes
Use the following command:
save location