VTech gz2334 - Manual (Page 10)

8 9
You can retrieve your voicemail messages from any telephone. If the indicators remain on
after all new messages have been reviewed, you can turn them off manually:
1. Make sure the handset is OFF.
2. Press PROG.
3. Press or until the screen displays MESSAGES WAITING.
4. Press SELECT. The screen displays:
5. Use or to choose YES or NO. Press SELECT or PROG to confirm. If you choose
YES, the MESSAGES WAITING animation on the handset and the MESSAGE LED
on the Base will turn off.
Set Language
You can select English, Spanish or French.
1. Make sure the handset is
OFF.
2. Press PROG.
3. Press or until the screen displays LANGUAGE.
4. Press SELECT. The current setting blinks.
5. Press or to select among ENGLISH, ESPANOL or FRENCH. When desired language
displayed, press SELECT or PROG. You will hear a confirmation beep.
Temporary Tone Dialing
If you have pulse (rotary) service, you can change from pulse to touch tone dialing during
a call by pressing
TONE. This is useful if you need to send touch tone signals for access to
telephone banking or long distance services.
1. Dial the number.
2. Press TONE. Buttons pressed after this send touch tone signals.
3. After you hang up, the phone automatically returns to pulse service.
Operating Range
This cordless telephone operates within the maximum power allowed by the Federal Com-
munications Commission (FCC). Even so, this handset and base can communicate over only
a certain distance — which can vary with the locations of the base and handset, the weather,
and the construction of your home or office.
If you receive a call while you are out of range, the handset might not ring — or if it
does ring, the call might not connect when you press
ON. Move closer to the base, then
press ON to answer the call.
If you move out of range during a phone conversation, you might hear noise or
interference. To improve reception, move closer to the base.
Telephone Operation
Basic Operation
LANGUAGE