VTech gz2334 - Manual (Page 21)

20
Basic Operation
21
Ad
ditional Inf
ormation
Ad
ditional Inf
ormation
Headset Operation
Your gz 2334 handset is equipped with a 2.5mm headset jack for use with an optional
accessory headset for handsfree operation. If you choose to use the headset option, you
must obtain an optional accessory headset, which is compatible with the gz 2334.
To purchase a headset, please call VTech Customer Service at 1-800-267-7377.
Once you have a compatible 2.5mm headset, locate the headset jack on the gz 2334
handset. Connect the plug on the headset cord to the jack (under a small rubber flap)
on the cordless handset. The plug should fit securely. Do not force the connection.
NOTE:
Whenever a compatible headset is connected
to the cordless handset, the microphone on the
handset will be muted. This is done to limit the
effect of background noise.
Belt Clip
The gz 2334 is also equipped with a detachable
belt clip. Align the pins on the inside edge of
the clip with the notches on the sides of the
handset. The belt clip should snap securely into
place. Do not force the connection.