VTech gz2334 - Manual (Page 16)

14
Basic Operation
15
Basic Operation
8. Press SELECT or PROG to confirm your selection. If you chose Y, the screen dis-
plays:
NOTE: If you chose N, skip to Step 10.
9. The ringer name will blink. Press
or to choose the desired ring tone. Then press
SELECT or PROG to confirm. The screen displays:
10. Press
or to change the setting. Choose Y (for yes) if you wish the phone to show
an animation when the incoming call matches this number. Choose N for no animation.
Your choices of animation are:
11. Press SELECT or PROG to confirm your selection. If you chose Y, the screen will display
one of the two animations. Press or to change the setting, then press SELECT or
PROG to confirm. You’ll hear a confirmation beep. When you select Y in step 7, a will
be displayed with the directory entry.
NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds, and
you will not be able to store a new number until you delete a stored number.
Edit a Number/Name Stored in the Directory
1. Press ( ). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through the entries.
-OR-
Press the dial pad key for the first letter of the entry you want to edit.
3. When the screen displays the entry you want to edit, press
SELECT. Then press until
EDIT flashes.
4. Press SELECT. The screen displays the name and number. The cursor appears at the
end of the name. Use , and the dial pad keys to edit the name. Press SELECT to
move on to edit the number. Use to backspace and make corrections. Press SELECT
to move on to edit the distinctive ring and animation settings. Follow steps 7 through 11
in
Store a Number/Name in the Directory.
Telephone Directory
alternately
alternately
Basic Operation