Vivitar ViviCam 5022 User Manual
Page 10
9
to your computer
” as soon as possible or insert an SD memory card in order to take more images!
Flash
Your camera has a built in flash function which enables you to take photos when the light condition is not good.
1.
Press the Up button.
2.
The icon
will appear at the top of the LCD indicating that the auto flash is turned on and ready to
use.
3.
Press the Up button again to change from the auto flash to the red eye function.
4.
The icon
will appear on the LCD indicating that the red eye reduction function has been
activated.
5.
Press the Up button once more until you see the icon
appear on the LCD screen. This indicates
that the flash is forced on.
6.
To turn off the flash function, press the Up button again until the icon
is displayed on the LCD.
Note: A
“Low Power” message will appear on the LCD screen, if you select the flash function when the battery
power is insufficient. To continue using the camera with the flash, please install new batteries.
Digital Zoom function
You can magnify your subject using the digital zoom. Use the T and W buttons to adjust the zoom.
1.
Press the T button to zoom in on your subject.