Installing sd memory card – Vivitar ViviCam 5022 User Manual
Page 7
6
Note:
1.
If you don
‟t intend to use your camera for an extended period of time, please remove the batteries to
avoid battery leakage and corrosion.
2.
Please don
‟t remove the batteries or power off your camera before downloading the test photos or
videos when you have not inserted an SD card. The test images will be lost forever if they are not
downloaded before the camera is shut down or powered off.
3.
Do not mix old and new batteries.
4.
We recommend you use Alkaline batteries. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium metal hydride) batteries.
5.
In order to conserve battery power if the camera is on but not in use for 60 seconds it will
automatically shut off. In this case too only the sample images will be lost.
Installing SD Memory Card
Your camera has a memory card slot that enables you to insert any
“SD” compatible memory card. Adding a
memory card is needed for normal use and will allow you to increase the capacity of your camera before you
have to transfer photos and videos to your PC. Install the SD memory card as below:
1.
Locate the Memory Card slot.
2.
Insert the Memory card into the slot in the correct direction. (see the sketch below)