Vivitar ViviCam 5022 - Manual (Page 6)

5
Preparing Your Camera for Use
Battery Installation
Your camera requires 3 AAA batteries. To insert the batteries into the camera:
1. Slide and open the battery compartment at the bottom of the camera.
2. Please make sure that the batteries are inserted with the correct polarity facing up.
3. Close the battery door.
When the
“No Power” is displayed on the LCD, this indicates that your camera has an insufficient battery
power level and will be automatically powered off. You need to download the sample photos and videos to your
PC. If there is no SD card inserted before it powers off the photos and videos will be lost.