Vivitar ViviCam 5022 - Manual (Page 9)

8
4. When you take out the SD memory card, “Card removed, change to Internal RAM” will appear on the LCD
screen. With no card in the camera you will now only be able to take one test photo or 10 seconds of
video.
Starting Your Camera
Press and hold the Power button to turn on your camera. The LCD screen will light up indicating that your
camera is on and ready for use.
To power off your camera, press and hold the Power button again for about 3 seconds.
Camera Modes
Taking photos
Power on your camera, the default mode is Camera mode. A camera icon appears in the top left corner of the
LCD screen.
1. Hold the camera steady and compose your object as appears in the LCD screen.
2. Press the Shutter button and wait a moment for the photo to be taken.
Note: When the internal memory is full, the LCD screen will display “Memory Full! Insert a SD Memory Card
to Transfer and Take More Photos! ” If you attempt to take photos or videos when the camera‟s internal
memory is full, the camera will beep continuously. Please download the test images to your computer using the
Vivit ar Experience Image Manager software as described below in the section “Transfer photos and videos