General, Front lamp housing, Lamps – Volvo 2007 S80 User Manual

Page 178: 06 maintenance and specifications

Advertising
background image

06 Maintenance and specifications

177

Lamps

06

General

All bulb specifications are given on page 183.
The following list contains bulbs and point-
source lamps that are specialised or unsuita-
ble for replacement except at a workshop:

• General interior lighting in the roof

• Reading lamps

• Glovebox lighting

• Direction indicators, door mirror

• Approach lighting, door mirror

• Brake lights

• Active Bi-Xenon, Bi-Xenon and LED bulbs

Front lamp housing

All front bulbs (except for fog lamps) are re-
placed by first removing the lamp housing
from the engine compartment.

Removing the headlamp
1. Switch off the ignition by pressing quickly

on the start/stop button and removing the
remote control key.

2. Withdraw the lamp housing’s locking

pins

.

3. Pull the lamp housing straight

forward

.

4. Detach the lamp housing connector by

pressing down the clip with your

thumb

and at the same time guide

out

the connector with your other

hand.

5. Lift out the lamp housing and place it on

a soft surface to avoid scratching the
lens.

6. Replace the bulb in question, see

page 183.

Installing the headlamp
1. Plug in the connector, a clicking sound

should be heard.

2. Reinstall the lamp housing and locking

pins. Check that they are correctly in-
serted.

3. Check the lighting.
The lamp housing must be plugged in and in-
stalled before the lighting is switched on or
the remote control key is inserted into the ig-
nition switch.

WARNING

On cars with Bi-Xenon and Active Bi-Xenon
headlamps, Xenon lamp replacement must
be carried out at an authorised Volvo work-
shop. The headlamps must be handled with
extreme care due to the Xenon lamp’s high-
voltage unit.

IMPORTANT

Never touch the glass part of the bulbs with
your fingers. Grease and oils from your fin-
gers are vaporised by the heat, coating the
reflector and then causing damage.

WARNING

Always switch off the ignition and remove
the remote control key before starting to re-
place a bulb.

G010479

G010325

IMPORTANT

Do not pull the electrical cable, only the
connector

Advertising