Vanguard Managed Solutions 650 - Manual (Page 52)

3-14 Installing and Coldloading 650 Series Software
Installing Software
Downloading Configuration Memory (CMEM)
Vanguard
Configuration
Loader Use the Vanguard Configuration Loader to quickly and easily download a
preprogrammed CMEM file to your Vanguard 650 Series.
Configuration Loader also lets you retrieve CMEM files from a Vanguard 650 Series
device and save them as backups on a local disk. Refer to the Configuration Loader
online Help for details on saving and restoring CMEM files.
The Configuration Loader automatically performs a node boot after downloading a
CMEM file to a Vanguard 650 Series device to implement the new CMEM.
Vanguard
Configuration
Loader This table contains the steps to use the Vanguard Configuration Loader.
Step Action
1 Click Configuration Loader, from the Vanguide Application Manager
window. The Configuration Loader window appears (Figure 3-6).
Figure 3-6. Configuration Loader Window
2 From the Drive control, choose the CD-ROM drive that contains the
preprogrammed CMEMs residing on the Vanguide 5.1 CD-ROM.
3 From the Product control, choose the type of 650 Series you are loading
with CMEM. This identifies the type of 650 Series device attached to the
PC.
4 From the Application control, choose the Application set to download.
This identifies the CMEM file that downloads to the 650 Series.
5 Choose the CMEM file from the Configuration File Name box.
6 Choose the COM port connected to the 650 Series device.
7 Choose Auto-Detect to set the speed at which to download the file.