VistaQuest VQ 350 - Manual (Page 10)

-6-
3.0 Capturing Images
Using your new camera is fun and easy.
There are two basic steps to capturing
your first image.
Step 1: Turn on the camera by holding down
the Power Button for two seconds.
Step 2: Press the Shutter Button to capture an image.
It is really that easy! The following sections will tell you about more features available on your camera.
3.1 Power-On the Camera
To power-on the camera hold down the Power ON/OFF button for two seconds as shown
above. The camera will beep once, indicating that it is ready. The Status LCD display will turn as
Illustrated in the picture at the right.
In this example the camera is ready to capture an image in High
Resolution Mode. (Function icons are explained in Section 3.3.)
Note that the camera will automatically power-off after 30 seconds of inactivity
to save battery power. To turn the camera on again, press the
Power button.