4 power-off the camera, 5 flash charging, 6 self-timer – VistaQuest VQ 350 User Manual

Page 13

Advertising
background image

-9-

3.4 Power-Off the Camera

Hold down the

Power ON/OFF

button for 2 second to turn-off the camera immediately.

You can also press

Mode

button until “

Off

” appears on the LCD; then press the

Shutter

button within three seconds to power-off the camera.

Note:

The camera will automatically power-off after 30 seconds of inactivity.

3.5 Flash Charging

Press Mode button until “

So

” appears on the LCD display then press the

Shutter

button

within three seconds to start charging the flash. The lightening icon “ ” will blink continuously until it is
fully charged.

3.6 Self-Timer

If you would like to capture yourself in the image you wish to capture, you may use the self-timer

feature to delay the camera by ten (10) seconds. Place the camera on a tripod or a flat, stable
surface. Turn on the camera. Press the

Mode

button until the “ ” icon appears on the LCD

display.

Press the

Shutter

button. The camera will beep as it counts down. The camera will then

capture an image automatically after 10 seconds.


Advertising