2 capture an image – VistaQuest VQ 350 User Manual
Page 11
-7-
3.2 Capture an Image
In film photography we say: “Take a Photo.” In digital photography we say: “Capture an Image.”
Capturing an image with the
VQ 350 is easy.
Step 1: Power-on the camera and look through the viewfinder to frame your subject.
Make sure your subject is no closer than three or four feet (one meter)
to insure good focus.
Step 2: Press the
Shutter
button to capture an image.
The camera will beep once and the image counter
will increase by one count.
For example the counter may change from
to
The display counter shows the number of images to be taken.
Memory is full when the “FL” warning message appears on the Info/Status LCD.
Downloading your images or choosing to delete them is necessary at that time
to make space available to capture additional images.
Warning: When batteries are disconnected or discharged, the memory and all
pictures taken will be erased
.