Optical audio out, Advanced audio, Equalizer – Vizio VM190XVT User Manual
Page 35: Reset audio mode, Picture settings menu, Ambient light sensor, Picture mode, Backlight, Brightness
VIZIO VM190XVT/VM230XVT User Manual
Version 9/16/2009
35
www.VIZIO.com
Optical Audio Out
This option allows selection of the type of processing for the SPDIF (Optical connector) when used with a
Home Theater system. Select to choose from Auto or Force PCM.
Advanced Audio
SRS TruSurround HD
This option sets the SRS True Surround HD surround sound
process. Choose from On or Off.
Note:
When SRS TruSurround HD is ON, Equalizer adjustments
are not available.
SRS TruVolume
When the programming switches to a commercial or when
changing from channel to channel, volume fluctuations occur.
When turned ON, SRS TruVolume
TM
provides the listener with a
comfortable and consistent volume level. VIZIO recommends
turning TruVolume off when listenting to music content.
Equalizer
Choose Flat, Rock, Pop, Classical, or Jazz. You can also adjust Bass
and Treble.
Note:
The Equalizer adjustment will only be available when SRS TruSurroundHD is set to Off.
Reset Audio Mode
Return all Audio settings to factory default. A screen will come up to confirm your selection or to cancel it.
Press $ or # to make the selection, and then press OK to accept it.
Note:
Only settings under the Audio menu will be reset.
Picture Settings Menu
Ambient Light Sensor
Choose On or Off. When set to On, your HDTV will automatically adjust to light changes in the room.
Picture Mode
Choose from Standard, Movie, Game, Vivid, or Custom. Each input (i.e.
HDMI, COMP, etc) remembers the custom setting you created. Select
Custom to manually adjust Backlight, Brightness, Contrast, Color, Tint,
Sharpness, and to access the More menu where further adjustments can
be made.
Backlight
Adjust the lamp current to affect the overall brilliance of the picture not the
Brightness (black level) or Contrast (white level) of the picture.
Note:
Backlight is only available when Picture Mode is set to Custom.
Brightness
Adjust black levels in the picture. If the brightness is too low you will not be
able to see the detail in darker parts of the picture and if the brightness is
too high the picture will look washed out.
Note:
Brightness is only available when Picture Mode is set to Custom.