Vizio VM190XVT - Manual (Page 36)

VIZIO VM190XVT/VM230XVT User Manual
Contrast
Adjust the white levels in the picture. If the contrast is too low the picture will look washed out and if the
contrast is too high you will not be able to see any detail in the bright parts of a picture.
Note: Contrast is only available when Picture Mode is set to Custom.
Color
Adjust the amount of color in the picture.
Note: Color is only available when Picture Mode is set to Custom.
Tint
Adjust the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for a realistic
appearance. In most cases, the default middle position is correct. If people’s faces look too orange try
reducing the level of color first.
Note: Tint is only available when Picture Mode is set to Custom.
Sharpness
Adjust the sharpness of the edges of elements in the picture. It does not produce detail that otherwise
does not exist. This adjustment is helpful when viewing (Standard Definition) sources.
Note: Sharpness is only available when Picture Mode is set to Custom.
Noise Reduction
This feature diminishes picture artifacts caused by the digitizing of image motion content that may be
present in the picture. Choose from Off, Low, Medium, or High.
More
Select More to adjust advanced options for fine tuning the picture.
Note: The More menu is only available when Picture Mode is set to Custom.
Color Temperature
Color Temperature is the “warmness” or “coolness” of the white
areas of the picture. Choose from Custom, Cool, Normal, or PC.
Normal is the setting for television broadcasting. Custom allows
you to set a preset calibrated for a white point to suit individual
preferences. Cool produces a blue-hued image. PC sets the white
point at the established setting for a computer display (9300K).
Each preset may also be adjusted for a customized setting.
Color Enhancement
This feature increases the picture reproduction performance of the
picture by reducing oversaturation of certain colors and improving
flesh tones. Choose from Off or On.
Adaptive Luma
Large areas of brightness in the picture will result in a higher
Average Picture Level (APL) and the overall picture will look too
light. This feature will lower the APL to counteract this effect.
Choose from Off or On.
DCR
Set this feature for Dynamic Contrast Ratio to improve the black level performance and increase
contrast ratio. Choose from Off or On.
36
www.VIZIO.com