Vizio VM190XVT - Manual (Page 38)

VIZIO VM190XVT/VM230XVT User Manual
Slide Size
Set the size of the thumbnails. Press # or $ to choose either large or small.
Help Menu
System Info
Display information about your TV, such as the model name and current software version.
Reset All Settings
Return all Picture and Audio settings to factory default. A screen will come up to confirm your selection or
to cancel it. Press $ or # to make the selection, and then press OK to accept it.
Setup Wizard
Use this function to return to the Initial Setup menu. Use this function if you want to have a guided setup
when you move your TV. Please refer to the Getting Started section for more information.
Note: Previously scanned channels will be removed.
Chapter 9 Maintenance and Troubleshooting
Cleaning the TV and Remote Control
1. Remove the power cable from the wall outlet.
2. Use a soft cloth moistened with diluted neutral cleaner to clean the TV and remote control. VIZIO
recommends using an HDTV cleaning solution which can be purchased at any major retailer.
3. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing.
4. Wipe the TV and remote control with a dry cloth after cleaning.
Important:
! Do not use volatile solvent (such as toluene, rosin and alcohol). Such chemicals may damage the
housing, screen glass, and remote control, and cause paint to peel.
! The screen glass is very fragile. Do not scrape it with any sharp object.
! Do not press or tap the screen to avoid cracking.
38
www.VIZIO.com