VBrick Systems MPEG-1 - Manual (Page 14)

8 EtherneTV Media Distribution System
Saving Changes
Once logged in you can navigate and change Configuration parameters as necessary. Each of
the configuration screens has the same options at the top. When done, click Apply to save any
changes you have made. Do not click Apply after each change.
Configuration
Once you are logged in, click Configuration to display the four sub-categories of
configuration settings for the set top box. Note that the VBrick_Host_Name shown on the
Logout Exits the configuration application.
System Information Provides system-level information including version number,
networking configuration, and memory usage. Note that the version
number is shown in the upper-right corner of each window.
System Time Use to set system time.
System Update Use to update the software. See System Upgrade on page 27.
Configuration Use to set all configuration parameters described in this document.
Log out Logs out the current user. You can log back in as a different user if
necessary.
Apply Saves any configuration changes.
Refresh Refreshes the window with the last saved information.
Exit Returns the Administration page from anywhere in the application.