VBrick Systems MPEG-1 - Manual (Page 38)

32 EtherneTV Media Distribution System
different password.) A sample pipe-delimited configuration file is shown below. You can
create a valid configuration file from a text file by giving it a
.cfg
extension.
172.22.133.1|admin
172.22.133.2|admin
172.22.133.3|admin
172.22.133.4|admin
T To edit an existing configuration file:
1. Select Upgrade using Configuration file .
2. Browse to an existing configuration file and click Open to populate the list box.
3. Go to File > Edit Config File and use any of the controls to edit the list.
4. Click Save when done.
Logging Upgrade Activities
The ETV-STBDownload application logs all commands and responses between the
application and the upgrade server, and between the application and the set top boxes. To
enable/disable application logging, go to
Preferences > Logging . For debugging purposes,
the log file records all error codes, success codes, checksums, etc. Since each new upgrade
overwrites the log, be sure to check the log file (and save if necessary) after a failed upgrade.
The
log.txt
file is saved by default in:
C:\Program Files\VBrick\ETV-STBDownload
.
IP Address Set top box IP address to be added. Click Add Set Top Box to
Config File to add IP address to list box.
Password Password used to login to the set top box.
Path Enter complete path or use Browse to select an existing
configuration (
.cfg
) file. This file will be written to disk when you
click Save .
Add Set Top Box to
Config File Adds specified set top box IP address to the configuration file and
populates the list box.