Vector Start-It VEC016 - Manual (Page 11)

11
6. BATTERY DISPOSAL
Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed
of properly. Recycling is required -contact your local authority for information. Failure to
comply with local, state and federal regulations can result in fines, or imprisonment.
BATTERY DISPOSAL WARNINGS
• Do not dispose of the battery in fire as this may result in an Explosion
• Before disposing of the battery, protect exposed terminals with heavy-duty electrical tape to
prevent shorting (shorting can result in injury or fire)
• Do not expose battery to fire or intense heat as it may explode
7. SPECIFICATIONS
Jump-Start Clamps ......................................................... 300 Amps - Heavy Duty Copper
Jumper Cables ........................................................................... #6AWG Welding Cable
Peak Amps. .............................................................................................................. 600
CA Cranking Amps .................................................................................................. 225
BatteryHigh Density AGM ..................................... 12 Volt 9 Amp Hour, Sealed Lead-Acid
Worklight Bulb .................................................................................... 0.2 Amp, 12 VDC
Accessory Socket Protection ............................................. 15 Amps Self-Resetting Breaker
Height ................................................................................................... 8.5 in (21.3 cm)
Width ..................................................................................................... 10 in (25.4 cm)
Depth. ................................................................................................... 4.4 in (11.2 cm)
Weight. ................................................................................................ 8.5 lbs (3.86 kg)
TWO YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, Ltd., regarding this product. There is no other
warranty, other than those described herein.
This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free
of defects in materials and workmanship for10 days from the date of purchase without
additional charge. The warranty does not extend to subsequent purchasers or users. Vector
Manufacturing, Ltd. will not be responsible for any amount of damage in excess of the retail
purchase price of the product under any circumstances. Incidental and consequential damages
are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or
damage to units from misuse or incorrect installation. Misuse includes wiring or connecting to
improper polarity power sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage
prepaid to Vector Manufacturing. Any defective product, other than accessories, that is
returned to Vector Manufacturing within 10 days of the date of purchase will be replaced free
of charge. If such a product is returned more than 10 days but less than 120 days from the
purchase date, Vector Manufacturing will repair the unit or, at its option, replace it free of
charge.