Led indicators, Verizon one user guide, Home networking – Verizon One User Manual
Page 114
© 2006 Verizon
Verizon One
User Guide
114
LED States and Descriptions
LED
State
Description
POWER
Solid Green
Verizon One
power is ON
OFF
Verizon One
power is OFF
Solid Red
CS POST (Power On Self Test), Failure (not bootable) or Device Malfunction.
Note:
The Power LED should be red no longer than two seconds after the power
on self test passes.
DSL/RDY
Solid Green
Good DSL sync.
Flashing Green
DSL attempting to sync
OFF
Verizon One power is OFF.
ETHERNET
Solid Green
Powered device is connected to one or more of the Ethernet ports (includes devices
(E1, E2, E3, E4)
with wake-on LAN capability where slight voltage is supplied to an Ethernet connection)
Note:
When using the WAN/E1 port, Ethernet LAN connection is limited to E2, E3,
and E4.
OFF
Communication Subsystem power is OFF, no cable or no powered device is connected to
the Ethernet ports.
20.3.2 LED Indicators
The LEDs located on the front of
Verizon One are used to verify the unit’s operation and status. Refer to the following chart for
details on the LEDs:
20. Home Networking