Verizon One - Manual (Page 26)

© 2006 Verizon
Verizon One User Guide
26
9.1 Registration Procedure
After successfully charging your Verizon
One Handset, you must perform a
registration procedure to allow the
Handset to communicate with the Base
Unit. To register the Handset to the Base
Unit, perform these steps:
1. Select the <Menu> function on the
Handset.
2. Using the round navigation button,
scroll down to fi nd the [Registration]
menu. Next, press the top left
corner key to select Registration.
3. Once you have selected
Registration, the Handset will
instruct you to press and hold the
<Intercom> key on the Base Unit.
Press and hold this key for 3 seconds.
4. After 3 seconds, the Handset will
automatically register to the Base Unit.
To verify successful registration, press the
<Talk/Flash> button on the Handset. A dial
tone will be heard from the Handset and a
call may be placed successfully. If no dial
tone is heard, but the Handset indicated
that it had successfully registered with
the Base, verify that the Base Unit is
connected to an active telephone line
and that this line is plugged into the DSL/
Phone port on the back of the Base Unit.
Each Verizon One phone comes with one
(1) cordless handset. Up to four additional
handsets may be purchased separately
and registered to the Verizon One base
station to create a phone system with fi ve
(5) distinct handset and intercom locations.
9. Registering the Handset to the Base Unit