Verizon One - Manual (Page 36)

© 2006 Verizon
Verizon One User Guide
36
12.1 Off-Hook Dialing and Dialing
Screen
Press <TALK> while the Standby screen
appears to go to the Off-Hook state. You
will hear a dial tone. Pressed numbers
will be dialed out immediately. The
following “Talk” screen will be displayed
for 5 seconds:
After 5 seconds, the following Talk
screen will display the caller’s name, the
phone number, the Talk time in minutes
and seconds, and the Volume level.
A talk time reading such as “000:09”,
as indicated above, represents the
talk time in minutes and seconds. The
timer should then start counting from
“000:06” onwards. After counting to
“999:59” the timer will change back to
“000:00” and continue counting. “VOL-2”
indicates the “level 2” talk volume level.
Selecting [Mute] will Mute the Handset
microphone. This will alternate the Talk
screen with the Call muted screen at
1-second intervals. You may select one
of the following options:
• To unmute the Handset, press <TALK>
or select [Unmute].
• Press <Hold> to put the call on Hold.
12. Dialing Functions