Verizon One - Manual (Page 28)

© 2006 Verizon
Verizon One User Guide
28
10.1 Handset Control Buttons
The following control buttons are
provided on the Verizon One Handset:
Note: “Off-Hook” refers to the condition
when either the Base Unit or Handset
is active in requesting a dial tone or is
engaged in a call. “On-Hook” refers to
the condition when either the Base Unit
or Handset is not active in requesting a
dial tone or placing a call.
Button Function
Volume Up/
Volume Down
(On side of
Handset)
Pressing these buttons will raise/lower the volume of the Handset
Ringer when the Handset is On-Hook. The ringer volume can be
set to low, medium, high, or off. The ringer level will be displayed
while you are changing the volume. Pressing these buttons when
in an Off-Hook mode will adjust the speaker volume.
Talk/Flash When pressed initially, this button places the phone in an Off-
Hook status, and you may dial the desired phone number. When
pressed during an active call, it will simulate a momentary press
and release of the phone’s hook switch and will put the active call
on hold and accept an incoming call as with Call Waiting* or 3-
Way Calling** features.
Off/Clear Pressing <Off/Clear> enables you to end any call by placing the
phone On-Hook. <Off/Clear> is also used to clear entries and
selections made on the soft-menu available on the Handset LCD.
10. Verizon One Handset Controls
*Call Waiting subscription is required.
**3-Way Calling subscription is required.