Verilux VH04WW1 - Manual (Page 4)

4
1. Important Safety Instructions — continued
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not use without dirt cup and filters in place.
• Store the CleanWave
® Sanitizing Bagless Vacuum indoors. Put the CleanWave Sanitizing Bagless Vacuum away after use to prevent tripping accidentally.
• Using improper voltage may result in damage to the motor and electronics and possible injury to the user. The correct voltage is listed on the rating label.
• This CleanWave Sanitizing Bagless Vacuum is provided with double insulation. Use only identical replacement parts. See instructions for Servicing of Double-
Insulated Appliances.
• This CleanWave Sanitizing Bagless Vacuum is not intended for use by persons, including children, who are not mentally able, physically capable, or who do not
understand the product.
• Not for use by children. Keep this product away from children and infants.
• Do not ride on or drop this product.
• Do not set any materials or objects on top of the CleanWave Sanitizing Bagless Vacuum.
• If there are abnormal product sounds, smells or fumes, unplug the device immediately and contact customer service.
• To prevent fire or shock hazard, do not expose this product to rain or excessive moisture.
• All user-serviceable parts are listed in Table 7-1. For servicing non-user-serviceable parts, please refer to qualified service personnel.
• Servicing is required when the apparatus is damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• There are a number of floor sensors on the underside of the unit. These floor sensors prevent the Sanitizing Light Bulb from activating when the product is
removed from the cleaning surface. The Sanitizing Light Bulb will re-activate when placed back on a cleaning surface.
• For your safety, DO NOT attempt to manually override the floor sensors.
• DO NOT point the Sanitizing Power Head directly at your or anyone’s face or skin.
• Do not touch the Sanitizing Light Bulb during or directly after use; it may be hot and may burn.
• Never use this device on pets.
• Allow bulb to cool before replacing.