Vizio VECO320L 1A - Manual (Page 13)

VIZIO VECO320L1A User’s Manual
Version 10/21/2008 13
www.VIZIO.com
CABLE BOX
VCR
Connecting Coaxial (RF)
Using Your Antenna or Digital Cable for DTV /TV
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your
antenna or digital cable (out-of-the-wall, not from
the Cable Box) to the DTV/TV CABLE/ANTENNA
connector.
3. Turn on the power to the HDTV.
4. Select DTV using the INPUT button on the remote
or side of your HDTV, or by pressing the TV button
on the remote control.
Note: Not all digital TV broadcasts are High
Definition (HD). Refer to the program guides, or
consult your cable, satellite or TV station operator.
Digital broadcasts are not available in all areas.
Refer to www.antennaweb.org for detailed
information. Make sure the antenna and coaxial
cable are correctly grounded.
For Professional antenna installation contact us at
www.VIZIO.com or call 1-888-VIZIOCE
(1-888-849-4623).
Using the Antenna or Cable through your VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna
Out” connector on the rear of your VCR to the
DTV/TV CABLE/ANTENNA connector at the rear
of the High Definition TV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote
or on the side of your HDTV, or by pressing the TV
button on the remote control.
Note: If you have an off-air antenna or cable TV,
connect it to the “Antenna In” connector on the
rear of your VCR.