Vizio VECO320L 1A - Manual (Page 18)

VIZIO VECO320L1A User’s Manual
18
www.VIZIO.com
CD DVD
CD DVD
Connecting your DVD Player (Better):
Using Component Video
1. Turn off the power to the HDTV and DVD player.
2. Connect the Y (green color) connector on your
DVD player to the corresponding Y (green color)
connector in the Component 1 group (green area
on the back or your HDTV.
3. Connect the Pb (blue color) connector on your
DVD player to the corresponding Pb (blue color)
connector in the Component 1 group.
4. Connect the Pr (red color) connector on your
DVD player to the corresponding Pr (red color)
connector in the Component 1.
5. Using an audio cable (white and red connectors),
connect the cable to the audio output connectors
associated with the Component output on your
DVD player and connect the other end to the
audio connectors associated with the Component
1 ports.
6. Turn on the power to the HDTV and DVD player.
7. Select Component 1 using the INPUT button on
the remote or on the side of your HDTV, or by
pressing the COMP button on the remote control.
8. If Component 1 input is being used, use
Component 2 as the input and follow the steps 1
through 6; then select Component 2 in step 7.
Note: Refer to your DVD player user manual for
more information about the video output
requirements of the product.
Connecting your DVD Player (Good):
Using S-Video (AV)
1. Turn off the power to the HDTV and DVD player.
2. Connect the S-Video jack on the rear of your
DVD player to the S-Video jack in the AV1 group
(yellow/red area on the back of your HDTV).
3. Connect an audio cable (white and red
connectors) to the audio output connectors
associated with the S-Video output on your DVD
player and connect the other end to the audio
connectors associated with the AV1/S-VIDEO
input on your HDTV.
4. Turn on the power to the HDTV and DVD player.
5. Select AV using the INPUT button on the remote
or on the side of your HDTV, or by pressing the
AV button on the remote control.